Preface |
View Article |
Thermophysical properties of [EMIM][BF4] and [HMIM][PF6] imidazolium ionic liquids with MWCNTs |
View Article |
Cement Concrete Modular Pavement Implementation for Pedestrian and Bicycle Path |
View Article |
Kevlar-based Composite Material and its Applications in Body Armour: A Short Literature Review |
View Article |
The Mechanical Properties of Aluminium Metal Matrix Composite (AlMMCs) Reinforced with Ni and SiCp |
View Article |
Evaluation of Mechanical Properties of Composite Laminates by Fractal Dimension |
View Article |
Rheological and Mechanical Investigation of PET, LDPE and HDPE Wastes Blended for Re-Use in Bio-Pipes |
View Article |
The Rheological Properties of LDPE Nanocomposites per a Capillary Rheometer: An Experimental and Numerical Study |
View Article |
Preparation of Sustainable Thermal Insulators from Waste Materials |
View Article |
Manufacturing of High-Load Engine Mounts From Rubber Composites (Natural Rubber and Carbon Black) with Novel Properties |
View Article |
Measurement of Alpha Activity in Several Types of Iraqi Ceramic and Cement in the Iraqi Markets |
View Article |
Characterisation of Fe Doped Layered Cathode Material as Nano-Rechargeable Batteries |
View Article |
The effect of adding graphene nanoparticles to the thermal performance of LiCo0.525Ni0.475O2 cathode materials in Li-ion batteries |
View Article |
High Uniformity Distribution of Fe@Au Preparation by a Micro-Emulsion Method |
View Article |
Effects of New Modification and Refinement Techniques of Mechanical Properties and Corrosion Behaviours of Al-Si Alloys |
View Article |
The Effect of the Nanoparticle SiO2 on the Mechanical and Physical Properties of Rubber Composites |
View Article |
Optimising the chemical demulsification of water-in-crude oil emulsion using the Taguchi method |
View Article |
Theoretical Model to Investigate the Heat Transfer Mechanism through a Heat Pipe with Graphene Oxide/Distilled Water as Working Fluid |
View Article |
Effect of Alloying Elements on the Erosion–Corrosion Behaviour of Cu-Based Alloys |
View Article |
Pomegranate Peel Plant Extract as Potential Corrosion Inhibitor for Mild Carbon Steel in a 1 M HCl Solution |
View Article |
Influence of Gas Flow Rate on Plasma Parameters Produced by a Plasma Jet and its Spectroscopic Diagnosis Using the OES Technique |
View Article |
Synthesis and Hemozoin Inhibitor of Side-Chain Modified Copper-Chloroquine Derivatives |
View Article |
The effect of different at.% Ag elements on the wear rate of nitinol alloys fabricated using the casting method |
View Article |
The synthesis and study of the electrical properties of composites (FeAl2O3) with paraffin wax and the determination of the mechanism of electrical conductivity |
View Article |
Modelling Low Velocity Impact on Structural Composites |
View Article |
Deep Learning-based Phase Prediction of High-Entropy Alloys |
View Article |
Preparation and Evaluation of CuO Nanoparticles Using the Sol-Gel Method |
View Article |
Structural and Magnetic Characterisations of Pb-Doped MgO Nanoparticles by a Modified Pechini Method |
View Article |
The Effect of Boron Addition on The Microstructure and Corrosion Resistance of Cu-Al-Ni Shape-Memory Alloys Prepared by Powder Technology |
View Article |
Characterisation of Copper-Chrome-Reduced Graphene Oxide Electrical Contact Materials Using Powder Metallurgy Technique |
View Article |
The Effect of the addition of Ta, Zr and in on the corrosion behaviour of CuAlMn alloys prepared via powder metallurgy |
View Article |
Assessment of Some Mechanical Properties of PMMA/Silica/Zirconia Nanocomposite as a Denture Base Material |
View Article |
Oxidation of Biocompatible Graphite–Ti Composite after Laser Ablation in Different Atmospheres |
View Article |